STEP ONE

Install T-Post Stepper™ on t-post at a height of about 12-18" so you can straddle the top wire. Securely fit the bottom slot of the T-Post Stepper™ over a stud on the t-post.


STEP TWO

Grasp the top of the t-post with both hands and place one foot on the T-Post Stepper™. Pull yourself up until standing with one foot on the T-Post Stepper™.


Screen Shot 2016-06-30 at 2.22.45 PM.png

STEP THREE

Continue to hold onto the top of the t-post with both hands as you swing your free leg over the top of the fence.


STEP FOUR

Place this lead foot on the opposite side of the T-Post Stepper™ and transfer your weight to this foot.


STEP FIVE

Still holding onto the top of the t-post, swing the trailing leg over the top of the fence.  Place trailing foot on the ground and step off the T-Post Stepper™ to remove from stud.


STEP SIX

Place trailing foot on the ground and step off the T-Post Stepper™ to remove from stud.


 

SAFETY FIRST:

Never cross a fence while holding a firearm or tool. Also make sure the t-post is securely installed and steady enough to hold your weight. If the post is unstable, move down the fence line to find a safer post to use.

WARNING:

Always make certain the groove on your T-Post Stepper™ slides down securely over the lug/stud on the t-post. Injury could result if not installed properly. T-Post Stepper™ is made for standard size t-posts and may not properly fit every t-post you encounter.